Short screw in polished alloy thermometer dipstick with O ring for models without a sump extension. Shows oil temperature in degrees celcius

Supplied unmarked, you will need to mark the rod using a small file to match your existing dipstick

 This part is available by special order, request a quote

17004951-z 17004951 GU17004951 17 00 49 51
 1700 4951 1700.4951 17.00.49.51

Pair of aluminium spacers and gaskets which allow the fitting of a round barrel rocker cover (loop or T3 type) on a square barrel engine

Rocker cover adapter kit - a simple way to get the classic round barrel appearance without swapping barrels and heads. This kit contains a pair of adapter plates and all neccessary gaskets

 3 in stock

Long screw in polished alloy thermometer dipstick with O ring for models with a sump extension. Shows oil temperature in degrees celcius

Supplied unmarked, you will need to mark the rod using a small file to match your existing dipstick

 This part is due back in stock soon, call 01484 841395 to reserve yours

28004950-z 28004950 GU28004950 28 00 49 50
 2800 4950 2800.4950 28.00.49.50

Pair of polished billet aluminium head protectors, these protect the top end of your engine in the unfortunate event of the bike being dropped.

For square barrel 850, 1000 and 1100 models. You may need longer rocker cover bolts due to the thickness of these protectors, see SSA06035 (you'll need 8). Don't confuse these thick, high quality billet items with cheaper imitations.

 2 in stock

Pair of polished billet aluminium head protectors, these protect the top end of your engine in the unfortunate event of the bike being dropped.

For round barrel 850 and 1000 models. You may need longer rocker cover bolts due to the thickness of these protectors, see SSA06035 (you'll need 8). Don't confuse these thick, high quality billet items with cheaper imitations, these protectors are exclusive to Gutsibits

 This part is due back in stock soon, call 01484 841395 to reserve yours

Pair of polished billet aluminium head protectors, these protect the top end of your engine in the unfortunate event of the bike being dropped.

For round barrel 850 and 1000 models. You may need longer rocker cover bolts due to the thickness of these protectors, see SSA06035 (you'll need 8). Don't confuse these thick, high quality billet items with cheaper imitations, these protectors are exclusive to Gutsibits

 This part is due back in stock soon, call 01484 841395 to reserve yours

Polished aluminium alternator cover

For big twins with Bosch charging systems only. Not deep enough for later bikes with Ducati or Saprisa. See ACA18650 for deeper version.

 This part is available by special order, request a quote

18001650-z 18001650 GU18001650 18 00 16 50
 1800 1650 1800.1650 18.00.16.50

Universal rack for mounting H & B top cases to luggage racks which don't have the H & B fitting. Includes grab rail, finished in black.

Because this is a universal rack you may need to do some additional drilling and obtain extra fasteners depending upon which type of luggage rack you are fitting this to

 This part is available by special order, request a quote

Stainless steel fasteners kit for VHB carb models with sump extension.This kit contains nuts, bolts and washers for the following: rocker covers, timing cover, gearbox bell housing, alternator cover, gearbox rear cover, neutral switch, drive box to swingarm, starter motor, head studs, exhaust flanges, inlet manifolds and sump. Just what you need to brighten up your Guzzi and ensure nuts and bolts don't seize on your bike

This engine bolt kit contains appropriate M6, M8, M10 socket cap and hex head bolts, nuts and washers. 149 pieces. To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). You may also require a replacement front engine bolt kit in stainless (SSA14450) or distributor screws (SSA05025 and SSA04008)

 3 in stock

Stainless steel fasteners kit for VHB carb models without sump extension.This kit contains nuts, bolts and washers for the following: rocker covers, timing cover, gearbox bell housing, alternator cover, gearbox rear cover, neutral switch, drive box to swingarm, starter motor, head studs, exhaust flanges, inlet manifolds and sump. Just what you need to brighten up your Guzzi and ensure nuts and bolts don't seize on your bike

This engine bolt kit contains appropriate M6, M8, M10 socket cap and hex head bolts, nuts and washers. 145 pieces. To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). You may also require a replacement front engine bolt kit in stainless (SSA14450) or distributor screws (SSA05025 and SSA04008)

 3 in stock